Open Today Sales: 9 AM-7 PMOpen Today Service: 7 AM-6 PMOpen Today Parts: 7:30 AM-5 PM
Planning to tow around Kitsap County means dealing with steep grades, ferry approaches, wet boat ramps, and frequent highway merges on WA-3 and WA-16. That is exactly where genuine Ford hitches, wiring, and integrated brake controllers matter most. Our parts counter stocks OEM receiver hitches (Class III/IV/V), 4-pin and 7-pin factory harnesses, trailer modules, and Ford Integrated Trailer Brake Controllers engineered to communicate cleanly with your vehicle’s ABS, stability control, and trailer sway control. Whether you tow a skiff to the Port of Bremerton Boat Ramp, haul a camper toward the Olympics, or pull jobsite equipment with a Super Duty, you get precise fitment, corrosion protection, and the two-year, unlimited-mileage Ford Parts Warranty that includes limited labor when installed by our dealership. Our expert Parts Advisors look up parts by VIN so your F-150, Ranger, Bronco, Explorer, Expedition, Transit, or Super Duty gets the exact kit, hardware, and programming it requires. Then count on factory-trained technicians to install to torque spec, calibrate modules, and validate lighting and brake gain. Port Orchard Ford backs you with high off-the-shelf fill rates, Saturday parts hours, and seamless coordination with service for same-visit installation—so your tow setup is ready for the next outing.
Every component is designed for your Ford’s chassis, electrical architecture, and safety systems. That means correct fastener lengths, rust-resistant coatings, and software compatibility that prevent warning lights or CAN-bus errors. Tell us what you tow, share your VIN, and we will match you with the right hitch class, wiring, and Ford controller—ready for quick installation and reliable performance near Bremerton, WA.
Towing confidence is more than metal and wiring—it is integration. Genuine Ford harnesses, modules, and brake controllers are validated with your vehicle’s ABS, stability control, trailer sway control, and even transmission shift logic. When you press the pedal, an OEM Integrated Trailer Brake Controller delivers linear, predictable braking that aligns with your Ford’s weight sensors and yaw-rate data. Factory connectors maintain watertight seals at the bumper and junctions, while anti-corrosion finishes resist salt air around Sinclair Inlet and the repeated dunk and dry cycle at local ramps. By choosing OEM, you avoid common aftermarket pitfalls: mismatched pinouts that trigger lamp faults, splices that invite moisture intrusion, and non-calibrated modules that can compromise safety features. Ford’s two-year, unlimited-mileage parts warranty (including limited labor when installed by our dealership) adds real peace of mind if you cover lots of Kitsap miles with a trailer in tow. Our technicians install with Ford service publications, torque-to-yield hardware where required, and post-install checks of trailer lighting, gain settings, battery charge line, and breakaway function. Port Orchard Ford also supports diesel and hybrid platforms with the correct cooling and charging provisions, so your Super Duty, F-150 PowerBoost, or Explorer stays protected while working as designed. With genuine components, your towing gear simply acts like it belongs—because it does.
Schedule installation and pick up parts in one stop, or ask us to coordinate service-bay install during your routine maintenance. Our Parts and Service teams work side-by-side, with Saturday availability and Pickup & Delivery offered within participating zip codes, so your tow setup fits your calendar. Port Orchard Ford maintains high on-hand inventory for popular F-150, Ranger, Bronco, Explorer, Expedition, and Super Duty towing kits, and we can special-order quickly if your build needs something specific.
Do I need a brake controller for my trailer?
Many trailers require their own brakes; a factory-integrated Ford controller ensures smooth braking and proper sync with vehicle safety systems.
Can you add a 7-pin and integrated controller to my Ford that has only a 4-pin?
Yes. We supply the OEM 7-pin harness, module, and dash-integrated controller, then program the system to your vehicle by VIN.
Will OEM wiring prevent warning lights and hyperflash issues?
Yes. Genuine Ford harnesses and modules maintain proper load detection and communication with the BCM, avoiding nuisance faults.
What if I tow different trailers?
Use multiple stored gain profiles and the correct ball mount height. We will help you set baselines and show quick checks before each trip.
From the Port of Bremerton Boat Ramp to weekend runs up WA-3, getting the right hitch class, wiring, and a calibrated, integrated brake controller keeps towing predictable and stress-free. Bring your VIN and trailer specs, and our Ford Parts Advisors will match you to factory-engineered components, then coordinate expert installation with our service team. We support diesel, hybrid, and EV-compatible accessories, carry name-brand tires rated for towing, and stock bed utility add-ons that make loading simpler. Visit our parts counter at 1215 East Bay Street, call 360-443-7375, or submit an online parts request—your order will be pre-staged to save time. If you need an install slot, we will align it with your next maintenance visit and complete the wiring, module programming, and road test in one appointment near Bremerton, WA. With genuine components, professional install, and our two-year, unlimited-mileage Ford Parts Warranty, your Ford is tow-ready for ferries, foothills, and everything in between. Port Orchard Ford is here to help you choose confidently, install correctly, and tow with assurance on every trip near Bremerton, WA.
